Welcome to the web site of Pungsung Precision Tube Co.,Ltd.

Inspection Equipment Status – Inspection Equipment

설비번호기기명측정범위제조회사
DYHU-95-182만능재료시험기100TON대경
KDMT만능재료시험기30ton㈜경도정밀
810-124K비커스 경도기Hv미쓰도요
HR-150A로커웰 경도기HRB SCTMC
SJ-310촉침식 표면거칠기 측정기(조도 측정기)Ra, Rz, Rmax, Pc미쓰도요
Positive Material IndentificationBruker Model S1 SORTER금속 성분분석기 합금Bruker
85535광학현미경합금UNION
FSQ Foundry Spectronac금속 성분분석기Fe계 합금AKASHI
7550722석정반수평지지대ZUNGWON
CL-200A휘도측정기휘도측정KONICA MINOLTA
HYDROSTATIC TESTNDE진영산업기계
BA 열처리Heat Treatment열처리COFUCO
P2-203DPOLISHER & GRINDER시편연마KOREA TECH
DESK-254Cutting M/C시편절단KOREA TECH
HM-35MOUNTING PRESS시편조립KOREA TECH
EDDYCHEK5와전류 탐상시험기NDEJSNT
  • Model KDMT-120 (100Ton), Model KDMT-156 (15Ton): The modulus of elasticity, yield strength, tensile strength and fracture strength were measured by tensile load , Elongation rate, etc. to determine the mechanical properties of materials and products.
  • Vickers Hardness Tester – Shenzhen Pride Instruments Model PMV-1000TM, Rocker Well Hardness Tester HR-150A: Cross-sectional hardness distribution of surface hardened layer by quenching or carburizing or softened layer by decarbonization, Estimate the strength, processing condition and heat treatment condition of the product by measuring the hardness of the fine part.
  • 2 Old-style Polishing Machine – Korea Tech Co., Ltd. Model P2-203D: Equipment for obtaining specular surfaces of test specimens such as metal materials
    Component Analyzer – FSQ Foundrt Spectrovac: Analysis of metallic material composition
  • Specimen Cutting Machine – Korea Tech Co., Ltd. Model Dwsk-254: Equipment to obtain the clean cutting surface against the thermal effect of the specimen for hardness, inspection and cutting of raw materials and finished products
  • Model HM-32-80: A device to fix a specimen through a high temperature / high pressure / quench process using a thermosetting resin.
  • Optical microscope – Union Model MCB: Equipment to check the defects and damage of the product by observing the metal structure
  • Roundness meter – Model RA-10: It is a device to measure and check roundness, cylindrical degree, concentricity, coaxiality, straightness.
  • MAHR Perthometer M1: A device for measuring the surface roughness of a workpiece by amplifying and increasing the vertical displacement of the stylus by changing the electrical signal when the stylus moves on the measuring surface.

Status of Inspection Equipment – Status of Measuring Tools

설비명규격제작처수량
실린더 게이지10~18.5mmMITUTOYO2EA
18~35mmMITUTOYO1EA
35~60mmMITUTOYO1EA
90~150mmMITUTOYO1EA
핀 게이지0.300~1.525mmMITUTOYO1EA
1.550~6.275mmMITUTOYO1EA
외경 마이크로미터0~25mmMITUTOYO20EA
25~50mmMITUTOYO5EA
50~75mmMITUTOYO3EA
75~100mmMITUTOYO2EA
100~125mmMITUTOYO1EA
125~150mmMITUTOYO1EA
175~200mmMITUTOYO1EA
내경 마이크로미터5~30mmMITUTOYO1EA
25~30mmMITUTOYO1EA
두께 게이지0~25mmMITUTOYO6EA
비니어 캘리퍼스0~150mmMITUTOYO4EA
0~200mmMITUTOYO3EA
10~200mmMITUTOYO1EA
0~300mmMITUTOYO4EA
줄자2mMITUTOYO5EA
7.5mMITUTOYO5EA
10mMITUTOYO5EA
20mMITUTOYO3EA